-
These blade protectors are essential for every single knife! They keep the edge of the knife not only safe but, also sharp, by avoiding the unnecessary hitting during transportation. They are made from cutting-proof plastic inlayed with felt for the best protection of your polished blade. They come in 3 sizes: Small: 16 x 3 cm Medium: 22 x 5 cm Large: 27 x 5,5 cm
-
Stropping is essential for a razor sharp edge! It is the final step of the sharpening process and it removes the last burr from your finishing stone and most importantly, straightens the apex as well as polishes your edge. This leather strop has is designed to be sturdy with 4 rubber for the best stability and high enough to have clearance on your knucles. Made from solid hardwood and premium quality leather.
Be assured not to miss this step, it makes a lot of difference!
How to: Take your strop and make gentle long, continuous, backward (from edge to spine) strokes on the strop, making sure all the edge is covered. Change blade edge side after each stroke. The angle to make these strokes should be the same as the one used in sharpening in stones. Leather Strop Dimensions: 20x5x3.5cm -
Stropping is essential for a razor sharp edge! It is the final step of the sharpening process and it removes the last burr from your finishing stone and most importantly, straightens the apex as well as polishes your edge. This leather strop has is designed to be sturdy with 4 rubber for the best stability and high enough to have clearance on your knucles. Made from solid hardwood and premium quality leather.
Be assured not to miss this step, it makes a lot of difference!
How to: Take your strop and make gentle long, continuous, backward (from edge to spine) strokes on the strop, making sure all the edge is covered. Change blade edge side after each stroke. The angle to make these strokes should be the same as the one used in sharpening in stones. Leather Strop Dimensions: 20x5x3.5cm -
A must have for all carbon steel lovers! These little abrasive erasers come into three grits coarse, medium and fine and will remove instantly any rust there is on your knife. They can be used also as scratch removers as they can be quite abrasive in all of your steels and appliances, inox or carbon. Made in Japan
-
The Glass Stone Field Holder is designed to store three Shapton Glass Stones in a secure way, as well as when turned over, as a sharpening base.
- Dimensions: 253 x 80 x 53mm
- Weight: approx. 640g
-
Dimensions: 210mm x 70mm x 10mm (Abrasive layer 5mm) The best step up from the 6000 grit for polishing your edge. The Shapton Glass 10000 will provide fast results and will give you a perfect feel of control and feedback of your sharpening. It is a finishing stone if you are looking for a mirror finish on your blade’s edge. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. Its case can be used as a stone base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
-
Shapton Kuromaku 12000 Dimensions: 210mm x 70mm x 15mm The 12000 is a finishing stone and is required if you need the final polish on your knives. It’s where you should finish your sharpening progress if you need a refined polished edge or if you need to refresh just by a touch or polish your edge. This amazing series, has the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. You don’t have to buy an extra stone base as its case can be used as base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
-
Dimensions: 210mm x 70mm x 15mm Also called finishing or honing stone, the 8000 grit Shapton Kuromaku stone, will provide an excellent high polish and refinement on your edge. This amazing series, is the latest “splash ‘n go” technology which means they do not require water immersion before use but rather just a splash of water and you’re ready to go! It will cut very fast and will remain flat for much longer than usual stones. You don’t have to buy an extra stone base as its case can be used as base too! Tip: Do not soak the stone for extended periods and let them dry very well before storage.
-
A Star is born!!! The pinnacle of artificial grinding stones, a sharpening tool containing the distilled essence of Shapton’s skill. Powerful sharpening power to cope with even the hardest blades, while delivering a delicate, uniform finish. Quick to use splash ‘n go– no need for soaking – and with outstanding durability, to keep its surface in tip-top condition. The RockStar will improve your work efficiency and allow you to enjoy the pleasure of a first-rate sharpening experience. The RockStar series comprises 10mm solid sharpening stones of a high quality equivalent to those in the GlassStone series while the GlassStone series products feature 5 mm tempered glass laminated to 5 mm sharpening stones, so double sharpening material.
Dimensions4 micro class / TYPE WA - Code 60416 - Length:210 mm
- Width:70 mm
- Thickness:10 mm
-
A Star is born!!! The pinnacle of artificial grinding stones, a sharpening tool containing the distilled essence of Shapton’s skill. Powerful sharpening power to cope with even the hardest blades, while delivering a delicate, uniform finish. Quick to use splash ‘n go– no need for soaking – and with outstanding durability, to keep its surface in tip-top condition. The RockStar will improve your work efficiency and allow you to enjoy the pleasure of a first-rate sharpening experience. The RockStar series comprises 10mm solid sharpening stones of a high quality equivalent to those in the GlassStone series while the GlassStone series products feature 5 mm tempered glass laminated to 5 mm sharpening stones, so double sharpening material.
Dimensions1 micro class / TYPE WA - Code 60217 - Length:210 mm
- Width:70 mm
- Thickness:10 mm
